Characterization of Components for Power Electronic Systems

Testing Capabilities

The combination of 7 ovens provide the ability to test specimens at different temperatures & different humidity at the same time. The first one of them is also able to test specimens which probably will release explosive gas, e.g., the battery, the super capacitor. The last 4 chambers are also able to do the thermal ramp test to for specimens to understand the failure mechanism under specific thermal shock and profile. All of the chambers can be remotely controlled.

Key Figures of Chambers

• 1* PL-2             : 225L, -40 to + 100 oC, RH 20% to 98%  Light tower alarm, N2 gas injection, H2+ temp. detection
• 1* PL-2J           : 225L, -40 to + 150 oC, RH 20% to 98%
• 1* PL-3J           : 400L, -40 to + 150 oC, RH 20% to 98%
• 1* SH-262         : 22L, -60 to + 150 oC, T ramp: 3/2 k/min, RH 30% to 98%
• 2* SH-642         : 64L, -40 to + 150 oC, T ramp: 2/1 k/min, RH 30% to 98%
• 1* SH-662         : 64L, -60 to + 150 oC, T ramp: 2/1 k/min, RH 30% to 98%
   

Potential to Research and Industry Service

Accelerate the reliability test and research on power electronic components and systems with the combination of chambers, covering wide range of temperature, humidity, and test specimens.
Provide service to industry companies for testing which complies standards of environmental testing of electrotechnical products, e.g., IEC 60068-2-1/2.